PHONE: 0330 016 8840

Tension Testers


    Phone Number

    Email Address*(required)



    LGS Tension Testers enable engineers to check and confirm the holding power of Eyebolts and other anchor points in most construction materials.

    Hydrajaws M2000 Medium Duty pull test equipment range enables engineers to confirm the holding power of anchors in most construction materials, either for the purpose of establishing safe working loads or to validate the correct installation of existing fixings. The tensile load of up to 25kN is applied to the fixing mechanically and hydraulics are used to register the load through an accurate analogue or digital gauge, making the tester very reliable.

    Load spreading bridges keep reaction loads away from the fixing. Fixings up to M16 may be located directly in the tester, while a variety of adaptors enable a wide range of other types and sizes to be tested.

    •  Up to 50mm of Stroke
    •  New Load Spreading Bridge with Telescopic Legs and swivel feet
    •  Turning Handle with 22mm integrated nut (for use in confined spaces)
    •  M12 Locking Adaptor
    •  M12 Ringbolt Adaptor Clevis
    •  Robust carry case with grab handle
    •  Calibration certificate (valid for 12 months)
    User Instructions